Madison MAD-TA10BT Manuel D'utilisation page 7

Input Selector Switch
There are 3 input positions. In BT/USB mode, the unit is in USB
mode when a USB stick is connected. When no USB stick is
plugged in or the USB stick is unplugged, the unit will scan
automatically for Bluetooth devices.
RCA LINE INPUT
This system has a L/R stereo RCA line input on the rear panel. It is compatible with
any common line output signal audio component such as a TV set, CD/DVD player or
MP3 player.
• Connect the RCA stereo leads from your home audio component to the red
and white LINE IN jacks on the rear panel.
Control the volume via the volume control on the front panel.
•
Earphone Connection
This system has a 3.5mm stereo earphone output. It is a direct Plug & Play
connection
Volume and track can be controlled via the control panel of this system.
•
When an earphone is plugged in, the speaker output is disabled.
•
Playing a Bluetooth device
This system can connect to a Bluetooth compatible device such as a smartphone or
portable music player and play wirelessly audio tracks that are stored in your
smartphone or music player.
Basic operation steps :
• Turn the system on.
• Set the input switch to BLUETOOTH. The BT LED is now flashing.
Make sure that no USB stick is inserted!
•
Pairing a new device
• The BT LED on the front panel is flashing.
• Enable the Bluetooth connection on your smartphone or player and search for
new devices.
• Select TA10BT in the list of found devices.
• If your smartphone or portable music player prompts you for a pairing code,
enter 0000.
©Copyright LOTRONIC 2015 MAD-TA10BT 7