Functional Test - Westfalia 321 523 391 101 Instructions De Montage

GB
3. Reprogramming on-board electronics
The control unit of the vehicle's multifunction unit (ISU) must be reprogrammed for the
extra "towed vehicle assembly" with a VAG service tester (VAG 1551, 1552 or VAS 5052).
Only then can the vehicle's additional, preinstalled indicator light (C2) be released.

4. Functional test

Reconnect the earthing wire to the battery.
Check all functions with a suitable testing instrument (with load resistance) or with a
trailer!!!
Secure all wire lines with cable binders.
Replace all removed coverings in reverse sequence.
Wiring plan of the 7-pin socket
Circuit
Left turn signal lamp
Towed vehicle rear fog lamp
Vehicle rear fog lamp
Earth
Right turn signal lamp
Right tail light
Brake light
Left tail light
10
Wire
black/white
blue
grey
brown
black/green
grey/red
black/red
grey/black
Contact
1
2
2a
3
4
5
6
7