General Information - Westfalia 321 523 391 101 Instructions De Montage

GB
Installation Instructions
Electrical System for Towing Hitch
Westfalia Order No.:
Area of Application:

General Information:

Before starting work, please read the installation instructions.
The holes drilled must be deburred and then coated with anti-corrosion paint.
The electrical set may only be installed by specially-trained personnel with the battery disconnected.
Please make sure before drilling that there is sufficient clearance behind the trim.
Important: Any electronically stored data (car radio, onboard computer etc.) may be lost.
The electrical socket in this wiring harness is provided with a switch-off contact for the vehicles
own rear fog light as standard equipment. During trailer towing the rear fog light of the pulling
vehicle is inoperative.
Install a rear fog lamp on older trailers if they do not already have one before operating this
electrical equipment with them.
The indicator lamp only flashes when a trailer is hitched to the vehicle. One-time flashing without
a trailer is permitted.
An electrical socket adapter may only be used during trailer towing, and must be removed after
trailer towing is completed!
The trailer functions have to be checked either with a trailer or a testing instrument with load
resistance.
The German version of these installation instructions shall be applicable in event of any legal
questions.
8
321 523 300 107 only fix tow bar
321 523 300 113
VW Polo 11/01
7-/13-pin
Subject to modification!