Before First Use; Preparing For Use - Philips FC9306 Mode D'emploi

English
6
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Before first use

1 Take the appliance and its accessories out of the box.
2 Remove any sticker, protective foil or plastic from the appliance.

preparing for use

attaching the handgrip
1 To connect the telescopic tube to the handgrip, press the spring-
loaded lock button on the handgrip (1) and insert the handgrip into
the tube (2). Fit the spring-loaded lock button into the opening in the
tube ('click').
2 To disconnect the tube from the handgrip, press the spring-loaded
lock button and pull the handgrip out of the tube.
attaching the nozzle and accessories
1 To connect the nozzle or an accessory to the tube, press the spring-
loaded lock button (1) on the tube and insert the tube into the floor
nozzle (2). Fit the spring-loaded lock button into the opening in the
nozzle ('click').
Note: You can also connect the nozzle or accessories directly to the handgrip in
the same way.
2 To disconnect the nozzle or an accessory from the tube, press the
spring-loaded lock button and pull the nozzle out of the tube.
hose
1 To connect the hose, push it firmly into the appliance ('click').
Note: Make sure that the projection of the hose fits into the recesses.