Philips FC9306 Mode D'emploi page 12

English
12
4 Fit the two lugs of the filter holder behind the ridge at the bottom
to ensure that it fits properly at the top (1). Then press the filter
holder home ('click') (2).
5 Place the dustbag holder with the dustbag back into the appliance
and close the cover.
HEPA 13 filter
HEPA 13 filter is able to remove 99.95% of all particles down to
0.0003mm in size from the outlet air. This not only includes normal house
dust, but also harmful microscopic vermin such as dust mites and their
excrements, which are well-known causes of respiratory allergies.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA filter every 2 years with an original Philips
filter of the correct type (see chapter 'Ordering accessories'). You can dispose of
your old filter with the normal household waste.
Replacing the HEPA 13 filter
1 Press the filter cover release button to open the filter cover.
2 Remove the filter cover.
3 Take out the HEPA 13 filter.
4 Place the new filter in the appliance.