General Information; Starting Up; Switching Off - Heylo 1 101 909 Manuel D'utilisation

1. General information

CAUTION: Read carefully before starting up!
Please observe the notes in the operating instructions carefully. In case of non-observation, the
warranty claims will become void. The manufacturer shall not be liable for any damage and/or
consequential damage resulting.
The DE series electric heaters are light, easily transportable producers of warm air. The heat
output of the DE 2 XL can be adjusted at 2 levels. The amount of air cannot be adjusted.
Connecting air pipes to the device DE 2 XL is not permitted. The device can be used for
ventilation and heating.
The electric heaters are suitable for spot heating (e.g. of machines or work places) and for
heating closed rooms. They have been designed to be used in a horizontal position.
The device may as well be applied for ventilation of small areas.
The appliance is fitted with a thermostat (Switching range + 5°C to + 40° C)
An external room thermostat cannot be connected to it.

2. Starting up

1. Plug three pin plug into the suitable socket.
2. function choice (heating or cold-ventilation)
Switch 1 (heating)
0 = off
1000 W
2000 W
1
2 3
If the switch 2 (ventilation) is turned off, the heating and the ventilator turn off automatically in
case the adjusted temperature (switch 3) has been reached. The temperature setting may be
between 5° and 40° C.
If the switch 2 (ventilation) is turned on, only the heating turns off automatically in case the
adjusted temperature has been reached, the ventilator works on for a better air circulation.
Switch 2 (ventilation)
When turning on switch 2 (ventilation), only the ventilator is active in case switch 1 (heating) is
set to zero.
0 = off
I = ventilate

Switching off

Switch off the appliance switch 1 and 2.
EN
9