Instructions For The Installation - Haverland RC-A Série Manuel D'installation Et Utilisation

INSTRUCTIONS FOR THE INSTALLATION

It is important that the transmitter IS FIXED FIRMLY TO A SOLID AND LEVELLED WALL. Please
make sure that transmitter remains COMPLETELY VERTICAL with respect to the floor. It is important
that you follow these instructions very carefully.
Open the packaging box and make sure that the transmitter is in perfect condition. MAKE SURE
-
THAT THERE IS A SOCKET NEAR THE AREA WHERE YOU ARE GOING TO PLACE IT.
Take out from the box the PATTERN TO SEE THE EXACT POSITION OF THE BORES
-
NECESSARY TO PUT THE TRANSMITTER ON THE WALL.
To avoid problems and to obtain maximum heating results it is necessary to keep a minimum
-
distance of 15 cm between the transmitter and any combustible material such as curtains,
furnitures, etc. The rest of the distances to be respected are described in the following figure
(Fig.3).
WALL OR
THE NEAREST
OBJECT
Minimum 15 cm
Apart from taking out the template explaining the fixing on the wall, take out the two wall
-
supports and the bag with the accessories
The measurements of the wall bores are (Fig.4):
-
MODEL
RC 4 A
RC 6 A
RC 8 A
RC 10 A
RC 12 A
EVENTUAL BOLSTER
Minimum 15 cm
A (mm) B (mm)
320 346
320 346
320 346
320 346
320 346
Minimum 15 cm
FLOOR
Minimum 15 cm
.
C (mm)
159
319
478
638
638
16
FIG. Nº. 3
WALL OR
THE NEAREST
OBJECT
FIG. Nº. 4