LENCO DIR-270WD Mode D'emploi page 22

FM (RADIO)
Select 'FM mode' from the main menu by using the navigation wheel (8) or with the navigation buttons
on the remote. Press the navigation wheel (8) to enter the FM radio mode. The FM mode will start on
87.5MHz.
To save all stations with strong signal, press the navigation wheel (8), it will show "auto scan?" choose
YES. Then it will start auto scan. Once the auto-scan is complete, stations will be saved in your favorites.
You will then be able to browse through these saved stations by holding down the '<' or '>' buttons to
skip between saved stations.
To manually scroll through FM frequency, simply press the '<' or '>' buttons to go backwards or
forwards through the frequency wave.
Pre-setting your favourite FM stations
To save presets manually, select and listen to the station frequency number for the station you wish
to save.
Press and hold the "FAV" button on remote control for 1-2 secs and the number '01' will display on
the screen. Use the navigation knob to browse through preset numbers(up to 99) and select the
chosen preset number you wish to save it as by pressing the navigation wheel(8).
Recalling preset FM stations
View your favourite FM stations when you are on FM mode by simply selecting the 'FAV' button on
remote control and begin scrolling through saved stations.
22