LENCO DIR-270WD Mode D'emploi page 19

Local Radio Setup
Playback Setup
Device
Menu
Equalizer
Resume When Power On
Software Update
Reset to Default
DLNA/UPnP
You may change the default DLNA name as you like. The information below is the introduction of
how to setup media streaming from PC or other media server. Study the own instructions of the
software or apps you are using for music streaming. Make sure the music files are in the format of
MP3, WMA or AAC.
There is a shortcut Local Radio from the Internet Radio menu so that you can
easily go to the station list of your location. You can setup your location
manually or let the system detect your current location. If you choose to
automatically detect your location, the system will detect the location
according to the IP address of your connected network. Press Local Station to
enter the local radio station list directly.
Select the play mode of the media center. You can select: Off (no repeat or
shuffle), Repeat all, Repeat one, or Shuffle.
The DIR-270 default device name for DLNA is "AirMusic". You may rename it
for DLNA set upon the PC or mobile. Use the QR code for download and
install the "AirMusic" control App.
You can select "Local Radio, my mediaU, Internet Radio, Sleep Radio, USB,
UPnP, Media Center, FM, DAB/DAB+, CD, Information Center, AUX,
Bluetooth, Timer, Alam" playing mode.
The default equalizer setting is "normal", but you may change it to "Flat, Jazz,
Rock, Soundtracks, Classical, Pop, News or my "EQ". Press the "EQ" button
on the remote control to quickly change the equalizer mode.
The system default setting is to resume the internet radio playback if you
were listening to internet radio or media center before switching off the unit.
If you turn this option off, the system will return to the main menu when
switching on the unit again.
If there is a software update on the server, the system will notify you. Before
starting a software upgrade, ensure that the unit is plugged into a stable
mains power connection. Disconnecting the power during a software
update may permanently damage the unit.
Restore to default settings. After the device is reset, the system will show the
language menu. Choose the desired language and press the navigate wheel(8)
19