Velleman LAB 3 in 1 Mode D'emploi page 5

FRONT SIDE
DIGITAL MULTIMETER
3 1/2 backlit LCD
Automatic polarity indication
DC voltage 200mV to 600V in 5 steps
AC voltage 200V and 600V
DC current 200µA to 10A in 5 steps
Resistance test 200ohm to 2Mohm
Diode, transistor and continuity tester
Data Hold function and buzzer
CATI 600V
CATII 300V
REAR SIDE
REGULATED POWER SUPPLY
Selectable output voltages:
3 - 4.5 -6 - 7.5 - 9 - 12Vdc
Output 1.5A (2A peak)
LED overload indication
With output on/off switch
Very low ripple
LED power indication
1. Mains connector (check if unit complies with your local AC voltage)
2. Mains power switch, this switch provides power to the soldering
station and the power supply
3. Multimeter battery compartment (see multimeter unit for more info)
4. Power supply heatsink, caution this plate can get hot.
4
SOLDERING STATION
Low-voltage iron: 24V
Ceramic 48W heating element with
temperature sensor
Temperature range: OFF– 150 -450°C
Lead free soldering compatible
2
1
General
3
5