en
operating days, the red LED in the
membrane keypad begins to light up (even
if no cooking takes place). This indicates
that the grease filter needs changing. After
cleaning the grease filter, press membrane
keys 4 and 5 simultaneously until the red
LED goes out. The operating hours counter
is then reset.
Indication mode
LEDs lighting up in clockwise direction
indicate the power level of the fan.
Switch over to rotary LEDs by pressing
membrane keys 4 and 5 simultaneously.
Switch operation
Pressing the switch to the left: Light ON/OFF
Pressing the switch to the right: Fan power
control
Pressing the switch to the right for 3
seconds: hood switches off.
The filter saturation indicator is also reset
via this switch. To do so, please press the
right side of the switch until the red LED goes
out.
Button 1: Function 1 –Operation ON/OFF
Function 2 – follow-up time (activation of the
follow-up time by pressing button 1 again;
the ceiling unit automatically switches down
by one level as a result within a short time
until it finally switches off altogether)
Button 2: Fan power in sequence 1-2-3-2-
1 of the individual power levels
Button 3: Intensive level (motor automatically
switched back to level 3 after 3 minutes).
-
+
Button 4: Light ON/OFF, lighting can be
dimmed by pressing for a longer time
Battery compartment 5: Please use type AA
batteries only
optional: IR remote control (Ruwido)
(see also separate operating instructions)
LED-Display
Details regarding the operating status of the
hood can be read off at the LED display of
the device.
LED 1: Display of operating status ON/OFF