Led Display - GUTMANN ESTRELLA II Mode D'emploi

Operation via switch
Button Push
b 1x
b 2x
b 3x
b 4x
b > 3sec.
a 1x
a 1x long
a 1x
b > 5 sec.
LED-Display
Information on the operating status of the cooker hood :
LED
c: Display of operating status fan ON / OFF

c: flashing: display of automatic follow-up time
(the hood automatically switches down by one power level every 5 minutes
.
until it is finally switched off)
1 Fan output level 1 (low motor output)
Press button b 1x

2 Fan output level 2 (medium motor output)
Press button b twice

3 Fan power level 3 (high motor power)
Press button b three times

i Intensive level (motor automatically switches back to level 3 after 5 minutes)
Press button b 4x

f Filter saturation display
When the red LED lights up / flashes, the metal filters must be cleaned (see
section Cleaning and care). The filter saturation indicator lights up after max.
.
15 operating hours (even when not cooking). After cleaning, press the reset
button (b) for about 10 seconds until the LED goes out.
device is switched on - TW function is deactivated when the red LED flashes ! )
Fan ON Motor runs at level 1, LED (c) + 1 on.
Motor runs at level 2, LED (c) + 1-2 on.
Motor starts at level 3, LED (c) + 1-3.
Motor starts at intensive level, LED (c) + 1-4 starts.
Motor automatically switches back to level 3 after 5 minutes.
Colour temperature adjustment
Pressing and holding button (b) will start the color change ( 2700 -
6500K ) and the last value will also be stored when
( only available when the engine is stopped )
Execution
Motor switches off
Lighting OFF
Lighting dimmer-funktion
Lighting OFF
released.
( Only possible when the
en
17