Operation
7.2
Using the cooling device
The cooling device conserves fresh foodstuffs. You can conserve frozen
foodstuffs and freeze fresh foodstuffs in the CoolMatic CB-36 and CB-40 de-
vices.
Caution!
a
Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can thus de-
stroy the glass containers.
➤ Switch the cooling device on by turning the knob to the right.
Note
I
After switching on, the cooling device requires approx. 60 s until the
compressor starts up.
Caution!
a
Ensure that the objects placed in the cooling device are suitable for
cooling to the selected temperature.
Lock
RHD-50
To open the cooling device, pull the clip (fig. 6 1, page 4) and open the
door.
To lock the cooling device, close the door and press it until the lock engages.
CB-36/CB-40/CB-110
The lid rests on top and is not locked.
Setting the temperature
You can set the temperature to any level using the knob. The built-in temper-
ature control regulates the temperature as follows:
Min. (left limit) = warmest setting
Max. (right limit) = coldest setting
Note
I
The cooling capacity can be influenced by
The ambient temperature,
The amount of food to be conserved,
– The frequency with which the door/lid is opened.
28
CB-36, CB-40, CB-110, RHD-50