Exit - Primer DSD-11 Guide Rapide

PARTIAL COUNTERS
Reset of partial counters
The following screen shows the option of setting the partial counters to zero. Use the SELECT
key to select YES or NO.
To exit the counter menu, press PROG, and the microprocessor changes to the technician's
menu window.

1.2.3.3 EXIT

With the "technician's menu" window open, place the cursor over EXIT, and press SELECT
to exit the technician's menu and go to the main Program menu.
PARTIAL COUNTERS
RUN TIME
HEAT TIME
FILTER (AL-2)
FLAME (AL-3)
A.FLOW (AL-4)
O.HEAT (AL-6)
PARTIAL COUNTERS
CLEAR COUNTERS
YES / NO
0023
0004
0004
0005
0000
0000
33