Uncrease Control - Primer DSD-11 Guide Rapide

To access the user menu, enter code 1-3-5-7. Using the INC () and DEC () keys you can
change the digits and with the SELECT key you can go from one digit to another. When the four
figures have been entered, press SELECT key to go to the User menu.
When SELECT key is pressed, the user menu appears in the window as shown below.
1.2.3.1 OPTION
With the configuration menu window open, place the cursor over OPTION, and press
SELECT key to go to the OPTION menu.
The following windows show the different concepts available for modification in the
OPTIONS menu.
1.2.3.1.1
This option allows you to configure the machine with the uncrease control system which
involves activating the basket motor so that it turns from one side to the other once the program
has completely finished and the door has not been opened within a minute. This is to prevent the
clothes inside the drum from creasing. Use the INC () and DEC () keys to move the cursor
from YES to NO or vice-versa, and the SELECT key to confirm the modification and move to the
next option.
PASSWORD
1-3-5-7
TYPE MENU
OPTION
COUNT
EXIT
TYPE MENU
OPTION
COUNT
EXIT

UNCREASE CONTROL

27