Version Two Coin Meter / Central Pay; Version Single Coin Meter (Selector) - Primer DSD-11 Guide Rapide

2.
When the dryer is on STANDBY, the time remaining is displayed, the clock does not flash and
the press start symbol is displayed. The operating temperature selected by the user (low,
medium or high) is also displayed.
Press the up/down arrows to change the selected temperature.
3. After pressing Start, the machine operates as with any normal version. The time remaining is
displayed and the clock flashes. A different temperature can be selected at any time using the
up/down arrows.
When the time runs out, a buzzer is heard, END is displayed.

1.2.1 VERSION TWO COIN METER / CENTRAL PAY

In these two versions will eventually be increased each for each dryer (up / down) displays and proceed
directly from the corresponding pulse coin compartment or central pay.

1.2.2 VERSION SINGLE COIN METER (SELECTOR)

In this version the device has a single coin meter and selector buttons with integrated LEDs to choose
which one you want to increase drying time.
25