Self-Service Mode - Primer DSD-11 Guide Rapide

1.2

SELF-SERVICE MODE

Only three temperatures are available in self-service mode and the time is only determined by the pulses
received by the microprocessor. There are no programs.
The Cool-down period is not separated from the rest of the time and simply disconnects the heating for
the last few minutes.
It has three states:
1. Waiting to receive pulses: A logo symbolising the input of coins is displayed.
24
3
2
4 4 1

1. Start/Stop button

2. Select button

3. Programation button
 4. Increase/Decrease buttons
INSERT COIN