Bushnell TROPHY CAM 119405 Mode D'emploi page 28

4.2 Playing back and Deleting Operations
Note that stand-alone operations of playback and deleting can only be
done in the SETUP mode.
4.2.1 LCD Playback (Models with Internal Color Viewscreen only
a) Push the "OK" button to enter image review mode.
b) Use the "UP" or "DOWN" buttons to scroll through images.
c) Push MENU to delete an image. Image delete mode works as
described in section 4.2.3 below.
d) To exit image review mode, push "OK".
4.2.2 TV Monitor Playback
a) A TV monitor can also be used to play back pictures (or videos)
from the device. To do this, connect a TV monitor or a Picture
Viewer (such as a digital picture frame) that has a TV-in interface
with the BUSHNELL TROPHY CAM by a video cable (included).
b) Enter into the SETUP mode.
c) Push the OK key. Then the latest picture (or video) will be
displayed on the TV. For video clips, press the SHOT (RIGHT)
key to start playing, press again to stop. When viewing images,
the total number of all images in the SD card and the index of
the displaying image are shown in the center of LCD and at the
bottom of TV monitor respectively.
d) Push the UP key for the previous picture (or video) and the
DOWN key for the next one.
e) Push the OK key to return to preview state when playback is
finished.
4.2.3 Deleting Operations (Stand-alone)
a) Firstly, find the image (or video) which is going to be deleted
(how to find the object please refer to 4.2.1).
b) Push the MENU key. Then [Del Image One] will be displayed in
the middle of LCD.
28
)