Bushnell TROPHY CAM 119405 Mode D'emploi page 20

4.1.7 Setting Video Length
This parameter is effective and can be adjusted only with the device in the
video mode for the ON mode. Its value extends from 1 to 60 seconds with
a step of one second. The default value is 10 seconds. During adjusting
(by the UP or Down key), there is a accelerating function for the RIGHT
key: pressing the RIGHT key steadily for a few seconds, the step length
will increase to 5 seconds first, and then to 10 seconds per step a few
seconds later (pressing LEFT key will decrease values).
The following shows you how to set video length to "Avi 5 Second"
provided that the previous value is "Avi 10 Second" in MENU state:
a) Push the UP or DOWN key until the parameter "Video Length"
appears as shown in the Fig. 11(a) and 11(1).
b) Push the RIGHT or LEFT key until the value changes to "Avi 5
Second" as shown in the Fig. 11(b) and 11(2).
c) Press OK key for saving setting or MENU key for canceling
operation and exiting. After pressing OK key the selected value
will be no more highlighted, shown in the Fig. 11(c) and 11(3).
20
Figure 11: Setting Video Length
(a)
(b)
(c)
(1)
(2)
(3)