Jøtul C 24 Manuel D'installation Et D'utilisation page 11

Fig. 9
10. The door can also be adjusted upwards or downwards
slightly on the door lock side by forcing it into correct
position NB! The door cannot be fully closed when
adjusting it!
4.10 Assembly/installation with easy
access behind the product.
Installation
The product is heavy! Ensure you have help when
positioning and installing it.
If there is easy access behind the product, it can be placed
directly into the surround. When the product is in the right
position, the fuel pipe and outside duct, fan or hot air ducts can
be connected. If there is no access, or limited access, to the
rear of the product when it is in position, we recommend you
fi rst read Section 4.11 which gives examples of how to proceed.
1. Position the product in the surround so that the front part of
the product and the front part of the surround are aligned.
Fig. 10
A
2. Unscrew the 4 screws (Fig. 10A) below the fi re grate using
a 5 mm Allen key from the bag of
Fig. 11
B
A
3. Adjust the 4 leg screws (Fig. 11A) below the screws that you
just removed until the product is level. Use the 4 mm Allen
key (Fig.11B) from the bag of screws
ENGLISH
A
screws.
11