Maintenance / Cleaning; Spare Parts - Leica RANGEMASTER CRF 1600-R Notice D'utilisation

Table des Matières

Les langues disponibles

MAINTENANCE / CLEANING

Your Leica Rangemaster CRF 1600-R does not require

any special care. Coarse dirt particles, such as sand,

should be removed with a fine hair brush or blown

away. Marks such as fingerprints on the front lens and

eyepiece lenses can be cleaned with a damp cloth and

then wiped off with a soft, clean leather or dust-free

cloth.

Important:

Do not exert heavy pressure when wiping highly soiled

lens surfaces. Although the coating is extremely abra-

sion resistant, it can be damaged by sand or salt crys-

tals. The housing should only be cleaned with a moist

leather cloth. Using dry cloths brings a risk of static

charge. Alcohol and other chemical solutions must not

be used to clean the optical system or the housing.

Every Leica Rangemaster CRF 1600-R has a unique

serial number in addition to its model name. Note this

number in your documentation for security.

Attention:

Never open the unit.

Should you ever require spare parts for your Leica

Rangemaster CRF 1600-R, such as eyepiece cups or a

carrying cord, please contact our Customer Service

department (for address, see page 32) or your national

Leica agent (for addresses, see Warranty Card).

Table des Matières

Table des Matières