V7 UPS1TW1500-1E Mode D'emploi page 3

Operation Display
UPS Mode
UPS Power ON
Standby Mode
AC Mode
Overload in AC mode
Battery Mode
Overload in battery mode
NOTE: The backlight will be always on when any fault or warning occurs.
LCD
When AVR is functioning,
icon will flash
every second.
icon will flash
In battery mode, press
button to mute
alarm and icon will
be on.
When battery level is low,
icon will flash
icon will flash
Description
When UPS is powered on, all icons will light up 1 second
Press button to switch displayed information.
1. Output voltage
2. Output frequency
3. Input voltage
4. Input frequency
5. Output power in kW
6. Output power in kVA
7. Estimated backup time
When overload occurs, alarm will beep every 0.5 second.
Alarm will beep every 10 seconds and LCD information will be
displayed in the following order when pressing
1. Estimated backup time
2. Output voltage
3. Output frequency
4. Input voltage
5. Input frequency
6. Output power in kW
7. Output power in kVA
Alarm will beep every second. This alarm can not be mute.
When overload occurs, alarm will beep every 0.5 second.
button.
www.V7-world.com