Preparing For The Measurement - Beurer BC 85 Mode D'emploi

System requirements for the „ beurer Health Manager" PC
software.
– from Windows 7 SP1
– from USB 2.0 (Type-A)
System requirements for the "beurer HealthManager" app
TM
– iOS ≥ 8.0, Android ≥ 4.4
®
– Bluetooth ≥ 4.0
List of compatible devices:

4. Preparing for the measurement

Inserting the batteries
• Remove the battery
compartment lid on the
left side of the device.
• Insert two 1.5 V micro
(alkaline type LR03) bat-
teries. Make sure that the batteries are inserted the correct
way round. Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery change symbol
no more measurements are possible and you must replace
all batteries.
All display elements are briefly displayed,
display. Now set the date and time as described below.
is flashing and E6 appears,
flashes in the
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Setting the hour format, date and time
This menu allows you to set the following functions, one after
another.
Hour format
➔
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date
and time and access them again later.
If you press and hold the M1 or M2 memory button, you
can set the values more quickly.
Hour format
• Press and hold the START/STOP button
for 5 seconds.
• Select the desired hour format using the M1/
M2 memory buttons and confirm with the
START/STOP button
22
Date Time
➔
.