List Of Materials; Parts Not Supplied - Elica ESR430S1 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly
5x45 mm
5.4x75 mm
4.5x13 mm
4x8 mm
Tools/Materials required
• Level
• Drill with 1 ⁄ " (3.0 cm), ⁄ " (3.0 mm),
1 1
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Saber or keyhole saw
• Metal snips
• Screwdrivers:
- Phillips
- Flat-blade
Pieces
1
6
6
4
4
Parts no supplied
Parts needed
• Home power supply cable
⁄ " (4.8 mm) drill bits • ½" (12.7 mm) UL listed or CSA approved strain relief
1
1 6
• 3 UL listed wire connectors
Supplied Part
Rectangular duct 3 ⁄ " x 10" (8.3 x 25.4 cm)
1
4
Torx 20 adapter
10x50 mm wall anchors
8x40 mm wall anchors
6.4x18 mm wall anchors
Pieces
1
1
6
6
2
5