Weight Only / "Step-On"-Function - Medisana PSM Mode D'emploi

Masquer les pouces Voir aussi pour PSM:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
GB
3 Operation
3.2
Weight only /
"Step-on"-function
20
WARNING
BATTERY SAFETY INFORMATION
• Do not disassemble batteries!
• Clean the battery and device contacts if necessary before
putting in the batteries!
• Remove discharged batteries from the device immediately!
• Increased risk of leakage, avoid contact with skin, eyes and
mucous membranes! If battery acid comes in contact with
any of this parts, rinse the affected area with copious
amounts of fresh water and seek medical attention
immediately!
• If a battery has been swallowed seek medical attention
immediately!
• Replace all of the batteries simultaneously!
• Only replace with batteries of the same type, never use
different types of batteries together or used batteries with
new ones!
• Insert the batteries correctly, observing the polarity!
• Keep the battery compartment well sealed!
• Remove the batteries from the device if it is not going to
be used for an extended period!
• Keep batteries out of children's reach!
• Do not attempt to recharge these batteries! There is a
danger of explosion!
• Do not short circuit! There is a danger of explosion!
• Do not throw into a fire! There is a danger of explosion!
• Keep unused batteries in their packaging away from metal
objects in order to prevent short circuiting!
• Do not throw used batteries into the household refuse;
put them in a hazardous waste container or take them to
a battery collection point, at the shop where they were
purchased!
1. Make sure the scales are on a firm, level surface. If you only want to
weigh yourself but have moved the scales just before, you must first ini-
tialise the scales. To do this, press your foot on the middle of the surface
of the scales. "0.0 kg" appears in the display. When the scales switch
off, they are ready for the "step-on" function.
This procedure is not necessary if you have not moved the scales.
2. Step onto the scales and stand still. The device switches on automatical-
ly and the display
3. Your weight is measured, flashes twice and is then finally displayed.
4. Step down from the scales. The display changes to "0.0 kg". The
scales switch off automatically after 8 seconds if you do not do anything
else.
briefly shows "0.0 kg".

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

40446

Table des Matières