Miscellaneous; Cleaning And Maintenance - Medisana PSM Mode D'emploi

GB
3 Operation / 4 Miscellaneous
3.5
Weighing and
measuring body fat,
water content and
muscle mass
3.6
Error messages

4 Miscellaneous

4.1
Cleaning and
maintenance
22
1. Press the ON/OFF button
the display.
2. Press the ▲ button
preset (0 - 9).
3. Your personal data is displayed.
4. When "0.0 kg" appears in the display, step barefoot onto the scales and
stand still. Place your feet on the electrodes
played. At the same time, the display shows a moving symbol "
which indicates that your body fat, water and muscle mass are being
measured.
5. When the " " symbol in the display
The display shows the values measured for the body fat, water, body
weight and then the muscle mass, bone weight and calorific require-
ment. The series of measured values is repeated twice in the display. The
scales then switch off automatically. Step off the scales.
NOTES
• Reliable measurements can only be achieved under certain
circumstances, as described in "2.5 Prerequisites for correct
measuring results", p. 14.
• Note that the measured muscle mass contains a certain
amount of water, which is included in the result.
The values measured for the water and muscle mass in
your body can therefore not be added together.
OL
The scale is overloaded.
LO
The battery is low and must be replaced.
ERR
Error during measurement / Value not within analysis range.
----
Data not saved.
• Remove the batteries before cleaning the unit.
• Never use aggressive cleaning agents or stiff brushes.
• Clean the surface and the electrodes after use with a soft, damp cloth.
Never use abrasive cleaning agents or alcohol.
• Do not allow any water to get into the unit. Do not immerse the device
in water. Do not use the unit again until it is completely dry.
to switch on the scales. The preset flashes in
and/or the ▼ button
. First, your weight is dis-
stops, the values are fixed.
to select your personal
",