Function
Temple
The thermometer has been designed for practical use. It's not meant
Tempera-
to replace a visit to the doctor. Please also remember to compare the
ture
measurement result to your regular body temperature.
The object mode shows the actual, unadjusted surface temperatures,
Object
which is different from the body temperature. It can help you to measure
Mode
any object other than body surface, for example the baby's milk.
If thermometer detects a body temperature => 37.5°C, there will be
Fever
four beeps sound with flashing reading to warn the user for potential
Alarm
fever.
How to measure temple temperature
1. Always make sure the probe is clean, and without damage.
2. Press "ON/OFF/Memory" button to power on the device.
3. Vertically aim the thermometer at the temple with a distance of less than 5 cm. If the
temple is covered with hair, sweat or dirt, remove the obstacle from the temple to
improve the measuring accuracy.
4. Press the "Start" button to take temperature. Measurement is complete when you
hear a long beep sound.
5. Read the recorded temperature from the LCD display.
6. Clean the probe after each use to ensure an accurate reading and avoid cross contam-
ination. ( See the section of Care and Cleaning for details.)
7. Remember to put in the storage case when not in use.
7