You can enjoy playing back your audio CDs, and MP3 or WMA files recorded on a disc/USB device. Some operations
may be different or restricted depending on the disc/USB device. Before playing back, check the compatibility of your
disc/USB device with this system (☞p.3).
CD
,
Playback operations
■ To start disc playback
1
Select CD as an input source (☞p.13).
2
Press
to open the disc tray and load a
CD.
3
Press
.
Playback starts automatically.
For an audio CD, playback starts from the first track,
and for MP3 or WMA files, playback starts in
alphanumeric order by the filename.
y
You can also close the disc tray by pressing
panel of the CD player.
DISC AND USB DEVICE OPERATIONS
USB
,
on the front
DISC AND USB DEVICE OPERATIONS
■ To start USB device playback
1
Select USB as an input source (☞p.13).
2
Connect your USB device to the USB port on
the CD player.
The total number of files are displayed.
The reading time may exceed 30 seconds depending
on the number of files/folders.
3
Press
to start playback.
The files are played back in the sequence of the date
and time created.
Notes
• Total time does not appear for USB device playback.
• If the USB device is partitioned, only the first partition is
displayed.
• Some files may not work properly depending on the USB
device specification.
• Copyright-protected files cannot be played back.
• This system can play back files of 4 GB in size or less.
To stop playback
Press
.
For audio CD, the total track number and total time of the
disc are displayed and for MP3/WMA disc or USB device,
the total file number is displayed on the front panel.
To pause playback
Press
.
To return to normal playback, press
To skip tracks
• To return to the start of the current track, press
• To skip to the next track, press
• To skip to the previous track, quickly press
To fast reverse or fast forward
• To fast reverse, press
• To fast forward, press
To return to normal playback, press
y
Only a low sound is heard during fast-reverse or fast-forward.
.
.
.
twice.
.
.
.
15
En