Listening To A Usb Device; Using Repeat/Shuffle Playback (Remote Control Only) - Yamaha MCR-B020 Mode D'emploi

LISTENING TO CD AND USB DEVICES

Listening to a USB device

1
2
Skipping folders (remote control only)
Display information (remote control only)

Using repeat/shuffle playback (remote control only)

The playback status is shown by the repeat/shuffle indicator in the front panel display.
Repeat playback
No display: Repeat mode off
1 track
:
: All tracks within the folder (data CD/USB device
only)
: All tracks
8
En
Press (repeat) repeatedly
to select one of the following
playback modes.
1 Press the USB source button to switch the
audio source to USB.
If a USB device is already connected, playback will start.
2 Connect a USB device to the USB port.
Playback starts automatically.
Playback can be controlled with either the remote control,
or the top panel on this unit (☞ P. 2, 3).
Folders and files will play in the order in which they were written.
Stop playback before disconnecting the USB device.
While a USB device is playing, you can use the remote
control's FOLDER ▲/▼ buttons to select the folder.
The folder/file number is shown for several seconds when
starting playback or skipping tracks.
If you press DISPLAY on the remote control while a song is
playing or paused, the information shown on the front panel
display will be switched in the following order.
- Elapsed song playback time
- Song name*
- Album name*
- Artist name*
- File name
- Folder name
* Shown only if this data is included in the song.
Shuffle playback
No display: Shuffle mode off
: All tracks within the folder (data CD/USB device
only)
: All tracks
Press (shuffle) repeatedly
to select one of the following
playback modes.