Repeating A Specified Section (Repeat A-B); Playing Back Randomly (Random Play); Customizing Playback Order (Program Play) - Yamaha PIANO CRAFT MCR-640 Mode D'emploi

Repeating a specified section
(Repeat A-B)
You can repeat a specified section of a track.
1
Press A-B to set the start point of repeat play.
"REP" and "A-" light up on the CD player's front
panel display.
2
Press A-B to set the end point of repeat play.
"A-B" lights up on the display.
The selected section is played back repeatedly.
To cancel repeat A-B
Press A-B again to make "A-B" disappear from the front
panel display.
Notes
• You cannot set repeat A-B to start in one track and end in
another track.
• This operation is not available for MP3 or WMA files recorded
on a disc/USB device.
• If you stop playback by pressing
• You cannot use repeat A-B when this unit is in Pure Direct
mode.
Playing back randomly
(Random Play)
You can play back tracks in the disc/USB device in
random order.
Note
When playing back a disc/USB device with Random Play, the
remaining time of the disc/USB device cannot be displayed.
RANDOM
Press RANDOM while playback is stopped.
The RANDOM indicator lights up on the CD player's
front panel display and Random Play starts.
To cancel Random Play
Press .
A-B
, repeat A-B is canceled.
DISC AND USB DEVICE OPERATIONS
Customizing playback order
(Program Play)
You can customize the playback order of up to 50 tracks
stored on an audio CD. This operation is not available for
data discs and USB devices.
Numeric keys
PROGRAM
1
Press to stop playback.
2
Press PROGRAM.
The CD player enters program input mode and the
PROG indicator lights up on the front panel display.
CD TRACK
Track number
3
Use the numeric keys to enter the track
number you want to program and press
ENTER.
Example: To select the track number 8, press 8, and
press ENTER to confirm the entry.
The front panel display shows the total number of
tracks and then the program screen.
Repeat this step until you program all desired tracks.
4
Press to start Program Play.
To clear the last programmed track
Press CLEAR during program input mode.
The last programmed track is cleared.
To clear all programmed tracks
Press CLEAR after exiting program input mode.
All programmed tracks are cleared.
The display is turned off after 2 seconds.
Note
If you open the disc tray or set the CD player to standby mode,
the program is automatically cleared.
CLEAR
ENTER
PROG
Program number
17
En