Operation - Cameo STUDIO PAR DTW Manuel D'utilisation

OPERATION

PLEASE NOTE
• As soon as the spotlight is correctly is connected to the power supply, the following will be displayed in succession: "Update Wait..." (only
for service purposes), "Welcome to Cameo", the model name and the software version. After this process, the lamp is ready for operation
and starts in the previously selected mode.
• If the DMX or slave operating mode is activated and there is no control signal at the DMX input, the display will start to flash after a few seconds.
• After approximately 30 seconds of inactivity, the display will automatically show the currently active operating mode.
• Press MODE to go up one level in the menu structure.
CONFIGURE DMX START ADDRESS
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu
item "DMX Address" and press ENTER. Using the UP and DOWN buttons, configure the desired DMX start address and press ENTER to
confirm. The DMX mode will start simultaneously.
Menu structure
Menu ENTER
DMX Addr UP/DOWN
CONFIGURING DMX MODE (DMX Mode)
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu
item "Menu DMX Mode" and press ENTER. Now select the desired DMX operating mode with the buttons UP and DOWN and confirm with
ENTER. Comprehensive DMX tables can be found in these instructions under "DMX CONTROL".
Menu structure
Menu ENTER
DMX Mode UP/DOWN
STANDALONE MODES
Press the MODE button repeatedly until "Menu" is displayed on the top line of the display. Use the UP and DOWN keys to select the menu
item "Menu StaAlone" and press ENTER. Now select the desired standalone operating mode with the buttons UP and DOWN and confirm
with ENTER.
Menu structure
Menu ENTER
StaAlone UP/DOWN
6
DMX Addr DMX Addr
–
001 511
DMX Mode
/
1CH
Amber - WW - CW
DMX Mode
/
3CH DIR
DMX Mode
ENTER
13CH
StaAlone StaAlone
/
Auto Sound
StaAlone StaAlone
/
TunWhite Static
ENTER
Sound to light
DMX Mode DMX Mode
/
2CH 3CH
Correlated Colour
Temperature
DMX Mode DMX Mode
/
3CH CCT 09CH
StaAlone
/
CCTMacro
ENTER
/
STL
/
/