Using In Hd (High Definition) Mode - Philips 26PF4310 Mode D'emploi

Using in HD (High Definition) Mode

HD Mode
The HD (High Definition) mode allows you to
enjoy clearer and sharper pictures through the
DVI inputs if you are using a HD
receiver/ equipment that can transmit high
definition programming.
You must first of all connect the HD equipment
(see p.13).
Choosing HD mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
then press the cursor key to switch the TV to
HD mode.
To return to TV mode, press the
and validate with ≥ key.
TV
Using the HD menus
Press the key to access the specific
MENU
settings of the HD mode. Use the cursor to
adjust them (the settings are automatically
saved):
Picture:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the
colour.
• Contrast: this changes the difference
between the light and dark tones.
• Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour
rendering: (bluer),
Cold
or (redder).
Warm
• Store: to store the picture adjustments and
settings.
.
and
HD
key, select
AV
(balanced)
Normal
Sound:
• Equalizer: to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
• Balance: this balances the sound on the left
and right speakers.
• Delta Volume: this is used to compensate
any volume discrepancies between the
different programs or EXT sockets.This
setting is available for programs 0 to 40 and
the EXT sockets.
• AVL (Automatic Volume Leveller): this is
used to limit increases in sound, especially on
program change or advertising slots.
• Dolby Virtual:To activate / deactivate the
surround sound effect.You can also access
these settings with key Q.
• Store: this is used to store the sound
settings.
Features:
• Sleep (Only available on certain versions): to
select an automatic standby period.
• PIP: to adjust the size and position of the
PIP screen.
• Horizontal Shift: to adjust the horizontal
placing of the image.
11