Using In Pc Monitor Mode - Philips 26PF4310 Mode D'emploi

Using in PC monitor mode

NOTE
– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is
operated under electromagnetic interference environment but will not affect the performance of this product.
– For better performance, good quality VGA cable with good noise isolation filter is recommended.
PC Mode
Your TV can be used as a computer monitor.
The PIP function lets you display a
superimposed image to watch the TV channels
at the same time.
The PIP function only works if your PC has a digital
output.
You must first of all connect the computer and
adjust the resolution (see p.13).
Choosing PC mode
& Press the
key on the remote control to
AV
display the
Source List
é Use the cursor </> key to select
then press the cursor ≥ key to switch the TV
to PC mode ( ).
DVI In
To return to TV mode, press the
and validate with ≥ key.
TV
Using PIP
While in PC mode you can call up a window
for TV channels.
Attention: the PIP feature is only available if a
computer is connected to the DVI In (see p. 13).
œ
& Press the
key to display the PIP screen.
The television image is reproduced in a small
superimposed window.
é Subsequent presses of the
the size of the window, switches to dual
screen and turns PIP off.
" Use the
keys to change the programmes
P –/+
of the PIP screen.
10
.
and
PC
key, select
AV
œ
key changes
Using the PC menus
Press the key to access the specific
MENU
settings of the PC monitor mode. Use the
cursor to adjust them (the settings are
automatically saved):
• Picture:
-
Brightness / Contrast
brightness and contrast.
-
Horizontal / Vertical*
horizontal and vertical placing of the image.
- : to adjust the colours (cold,
Adjust Colour
normal or warm).
• Audio Selection: to choose the sound
reproduced on the TV (PC or TV).
• Features:
- *: eliminates the horizontal
Phase/Clock
( ) and vertical (
Phase
- : to choose between full screen or
Format
native format of the PC screens.
- : to adjust the size and position of the
PIP
PIP screen.
- : position is set automatically.
Auto Adjust*
• Reset To Factory Setting: to return to the
factory settings (default settings).
*These adjustments are not available when a
computer is connected to the
: to adjust the
: to adjust the
) interfering lines.
Clock
.
DVI In