Accessories - Kity TAB660 Notice Originale

ta:
• Motor manufacturer
• Type of current of the motor
• Data recorded on the machine's rating plate
• Data recorded on the switch's rating plate
If a motor has to be returned, it must always be dispatched
with the complete driving unit and switch.
Maintenance
• Overhauls, maintenance work, cleaning, as well as the
elimination of any malfunctions must only be undertak-
en after turning off the motor.
• All protective and safety equipment must be reinstalled
immediately upon completion of any repair or mainte-
nance work.
• Clean and lightly oil the spindle thread of the tool holder
when changing tools.
• When possible, the tail stock sleeve should be removed
by unscrewing it, cleaned and then sprayed with a dry
lubricant. Grease the threaded spindle.
• Check the eccentric clamp of the tailstock as well as the
tool holder and adjust if necessary. In addition, tighten
the hex nut under the bracket.
• Check the drive belt and replace when necessary.
Problem
a)
Motor doesn't start
b)
c)
Work piece flatters while a)
working
b)
c)
Tool rest or tailstock Setting the eccentric clamping
cannot be clamped
12 english
Trouble shooting
Possible Cause
No electricity
Defective switch, condenser
Defective extension cord
Working piece becomes loose
while working
Work piece is not properly centered
Rotational speed is too high

Accessories

Article
Cup chuck Ø30 mm
Cup chuck Ø40 mm
Cup chuck Ø60 mm
Faceplate with woodscrew Ø80 mm
Tree jaw chuck Ø100 mm
Foure jaw chuck Ø125 mm
Faceplate Ø200 mm
Set with 5 turning tools
Long tool rest 300 mm
Extension bed
Belt
Help
a) Check fuse
b) Have an electrician inspect unit
c) Unplug cord, inspect and replace, if
necessary
a) Follow the instructions in the operating
manual
b) Follow the instructions in the operating
manual
c) Select a lower rotational speed
Return the hexagonal nut at the bottom side
about ½ rotation with the socket spanner
Art. No.
20 0661 030
20 0661 040
20 0661 060
20 0661 080
20 0661 012
20 0661 013
20 0661 200
30 0660 005
20 0660 009
20 0660 002
20 0660 041