emerio HMS-113257.9 Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
HMS-113257.9
PARTS DESCRIPTION
1. Eject button
2. Speed button
3. Handle
4. Housing
5. Stick mixer attachment
6. Chopper bowl
7. Blade
8. Beaters
9. Dough hooks
10. Chopper cover
11. Cover of the mounting hole
Note: You can press the speed button to adjust the speed. The more force you press on the button, the higher
speed you will get for mixing.
BEFORE FIRST USE
1. Carefully unpack your hand mixer set and remove all packaging material.
2. Clean the various accessories of your appliance in warm soapy water, rinse and dry thoroughly before use.
USE
1. Chopping
1) Attach the blade on to the blade support in the jar and pour in the food to be chopped. You can chop meat,
cheese, onions, herbs, garlic, carrots, almonds, prunes etc..
2) Fix the chopper cover on the chopper bowl; place the motor unit onto the chopper cover by opening the
cover of the mounting hole. Rotate the motor unit to fix completely. ATTENTION: make sure the motor unit
is fixed to the bottom of the connector on the chopper cover.
3) Plug in. Press and hold the speed button to start working. During operation, hold the motor unit with one
hand and use the other to hold the chopper bowl.
4) After use, unplug the appliance and take the motor unit from the chopper. Open the cover and take out the
blade carefully. Caution: Blade is every sharp, handle with care.
5) Remove the processed food from the chopper bowl.
Caution: For food like meat (quantity should be under 350g), do not operate the appliance more than 30 seconds
for each time. For food like vegetables and fruit (do not exceed the "max" level on the bowl), do not operate the
appliance more than 60 seconds for each time.
2. Mixing and kneading
1) Insert beaters or dough hooks into the left and right opening on the bottom of the motor unit. Make sure
they are locked into position.
2) Plug in the appliance.
3) Place the ingredients in an appropriate container. Position the beaters or dough hooks into the container
and then press and hold the speed button. The appliance will start working.
4) After use, unplug the appliance. While pressing the eject button, pull out the beaters/dough hooks.
Caution:
Do not continuously operate the mixer too long. The motor may overheat. After 3 minutes continuous use,
- 5 -
EN

Publicité

Table des Matières
loading

Table des Matières