Fritel WA 1450 Mode D'emploi page 16

b) Then turn the thermostat knob onto the chosen position. As soon as you have chosen a
thermostat position the red control lamp lights up.
ATTENTION: the appliance will now get hot. Only touch the thermostat knob and the
handles.
c) The red control lamp will turn off as soon as the chosen thermostat position (chosen
temperature) has been reached.
d) Open the appliance. For your convenience the appliance remains in open position at
105° (upright system). Rub the plates in with some oil (only with every first baking)
e) You can now add the toast, the waffle dough ... Do not use sharp utensils as they could
damage the non-stick coating of the plates.
f) Close the appliance.
g) After baking, open the appliance and remove the waffle or sandwich immediately.
h) When you are finished baking, turn the thermostat kno completely tot he left to the 0-
position.
i) Unplug the appliance.
Tips for baking waffles (more tips and tricks on www.fritel.com!)
 ALWAYS follow the recipe correctly or use a baking mix.
 ALWAYS use high quality flower and make sure the dough is well beaten.
 Wait for the red control lamp turns off before adding the paste to the appliance (only for
the first waffle).
 Remove the waffle with a special U-shaped fork. Insert the fork horizontally into the
waffle in order not to damage the non-sticking coating or the waffle. See point 6
« Accessory »: waffle fork WF 1000.
4. CLEANING
 Pull the plug from the socket.
 Let the appliance cool off entirely.
 Baking plates: moisten a soft cloth in hot soapy water. Wring it out and clean the plates.
NEVER use stiff washing-up brushes, this could damage the anti stick coating!
 The base and the housing of the appliance can be cleaned with a damp cloth. NEVER
immerse these parts in water or in any other liquid.
5. USEFUL TIPS IN CASE OF MALFUNCTIONS
Do not use the appliance when it is malfunctioning. First go through the following:
The appliance doesn't warm or the control lamps don't light up:
 Check if your appliance is connected to the right mains voltage, whether there is
mains voltage, and if the appliance was plugged in correctly. If there is still a
malfunctioning, please return the appliance to your sales point.
 If the power cord is damaged, don't use your appliance and return it to your sales
point immediately.
The appliance has been designed for domestic use. The guarantee conditions expire
upon professional use. Defects and/or damages following to the non observance of
the user manual are not covered by the guarantee.
16