NEVER immerse the appliance, the power cord or the
plug in water or any other liquid. They are only to be
cleaned with a damp cloth.
A damaged power cord can cause electric shocks.
NEVER use the appliance if it is damaged, fallen or
shows a malfunction, or if the power cord or plug are
damaged. In all these cases return the appliance to your
sales point or recognized after sales service.
NEVER use separate timers or remote control systems.
This appliance is only suited for indoor household use,
and not for professional use.
ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or table,
so that the appliance won't move or turn over.
After use remove the plug from the power point. Also proceed this way when the
appliance is not in use, before cleaning and moving.
NEVER use the appliance outdoor.
NEVER use extension cords or sockets. Place the appliance near a power point and
connect it directly. ALWAYS complete unroll the power cord.
NEVER let the cord hang over the edge of the table or the counter.
NEVER place the power supply cord near heat sources such as cookers, heatings or
ovens.
Only use the appliance on the mains voltage as indicated on the identification label.
2. BEFORE THE FIRST USE
Remove all packaging and stickers and keep packaging away from children.
First check your appliances for possible damages. If it is damaged, do NOT use the
appliance but bring it back to your sales point.
Clean the plates as described under 'Cleaning' (4) before the first use.
Check if the mains voltage of your appliance (230 Volt) corresponds with the mains
voltage in your home.
The appliance is now ready for use.
ATTENTION: Upon the first use, there might be a slight odor or smoke output. This is
normal.
3. OPERATION OF THE APPLIANCE
a) Completely unroll the power cord and plug in the appliance in a 230 V socket.
appliance must be in closed position.
15
The