Care And Maintenance - Tanita HD-351BT Mode D'emploi

1. Precaution
Precautions
To recalibrate the scale, gently tap the Personal Key with your toe (Fig.1).
Do not place your hand on the scale while recalibrating (Fig.2); if you do
"-0.2„ or "-0.4„ will be displayed. Using your toe, tap the Personal Key again to display
"0.0"

Care and Maintenance

• Place the scale in an area free from heating equipment, high humidity, or extreme temperature changes.
• Never submerge the scale in water or spill chemical liquids on it. To clean, use a dampened cloth and mild
detergent.
• Avoid excessive impact or vibration to the unit.
2. Part Names
3. Feature
•Output weight data using Bluetooth technology.
•Previous weight using personal key.
•Digital accuracy and reliability.
4. Preparation Before Use
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied AA-
batteries as indicated. Be sure to use only alkaline batteries.
Note : Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend
to use this unit for a long period of time, it is advisable to remove the batteries
before storage.
Please note that the included batteries from factory may have decreased energy levels over
time.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to
ensure safe and accurate measurement.
Note : To avoid possible injury, do not step on the edge of the platform.
Fig.1 Fig.2
Measuring Platform
LCD Display
Battery Compartment on Bottom
Unit Mode Switch on Bottom
Personal Key
Bluetooth OUTPUT Key
•Classic design fits any décor.
•Durable construction; non-skid surface.
•"Lo" message appears when batteries need replacing.
1