Features And Functions; Preparations Before Use - Tanita InnerScan BC-583 Mode D'emploi

Features and functions

1. Display Screen
3. Heel Electrodes

Preparations before use

Inserting the Batteries
Open the battery cover at the back of the measuring platform. Insert the supplied
CR2032 batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fl uid may leak and damage fl oors. If you do not
intend to use this unit for a long period of time, it is advisable to remove the
batteries before storage.
Please note that the included batteries from factory may have decreased energy
levels over time.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure
safe and accurate measurement.
Use carpet feet when the scale is used on soft surface, such as rugs or carpeting.
Note: To avoid possible injury, do not step on the edge of the platform.
Do not use the carpet feet on hard, fl at surface as the unit may tip over.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny;
avoid soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
2
2. Ball-of Foot
Electrodes
6. Personal Keys
7. Feature
Indicators
Accessories
9. Lithium Batteries
CR2032 (2)
5. Arrow (Select) Buttons
4. Set Button
S E T
GUEST
RECALL
1
2
3
4
8. Weight-Only Key
10. Carpet Feet (4)
For use on carpeting or
rugs only of thickness up
to 1/4" (6mm).