5.1.3 Use The Motion Sensor - Philips Speechmike premium LFH3520 Manuel De L'utilisateur

On the tab Application
3
button to create a new profile.
Browse and select the application
4
executable and click on
A profile for the selected application will be
added to the list of profiles.
D Note
Exit the target application during
configuration. Open the application when
the device configuration settings are saved.
Select a button from the button colum and
5
click the icon to assign a shortcut. You
can assign different shortcuts for pressing
and releasing a key.
The shortcut editor window is displayed.
Enter name for the shortcut and click
6
the Add button add an opertion for the
shortcut. The following options are available:
• Hotkey: Assign a keyboard shortcut
• Text: Enter the text to be inserted when
a key on the SpeechMike is pressed
• Start an application by pressing a key on
the SpeechMike
• Mouse button
12
control, click the
.
OPEN
• Dragon NaturallySpeaking command
• Delay
You can add one operation or a sequence of
7
operations for every shortcut.
Click the Apply
8
settings.
D Note
The Device Control Center cannot be used
to program application shortcuts for Philips
SpeechExec software. Shortcuts for Philips
SpeechExec can be configured in the
settings menu of SpeechExec. See the SpeechExec
application help for more information.
E Tip
Application control configuration settings can be
saved into files and imported later to apply the
same configuration settings to several devices.

5.1.3 Use the motion sensor

The SpeechMike features an integrated motion
sensor that detects when the device is put
on the table and is being picked up again.
The motion sensor can mute and unmute the
microphone automatically or custom functions
can be programmed, e.g., to pause and to
continue recording. Use the Device Control
Center software to enable automatic muting of
the microphone (Device
or to program custom functions
control tab).
E Tip
Press and hold the F2 and F4 keys on the
SpeechMike simultaneously until the record
button to save the new
General
tab > Advanced
(Application
User manual
settings)