Insert The Batteries; Charge The Batteries; Charging Using The Docking Station And The Ac Charger - Philips SPEECHMIKE AIR LFH3000 Manuel De L'utilisateur

E Tip
For the mobile user, the receiver module can
be used without the docking station by directly
connecting it to the computer using the USB
cable.
3.3

Insert the batteries

The SpeechMike can be operated with the
rechargeable Philips batteries LFH9154 or AAA
alkaline batteries.
Press down the battery cover release button
1
and open the battery cover.
Place the batteries in the correct polarity as
2
indicated and close the cover.
User manual
D Notes
• Do not mix batteries of different types and/
or brands.
• Remove the batteries if you will not be using
the SpeechMike for an extended period
of time. Leaking batteries may damage the
SpeechMike.
• Stop recording before replacing the batteries.
Removing the batteries during recording may
result in data loss.
3.4

Charge the batteries

The rechargeable Philips batteries LFH9154 can
be charged in the SpeechMike using the docking
station in combination with the USB cable or
the AC charger. It is also possible to charge the
batteries by directly connecting the AC charger
to the SpeechMike. A complete recharge cycle
takes about 2.5 hours.
Warning
B
Use only the original charger. Using
another charger may damage the device.
D Notes
• Batteries other than the supplied Philips
batteries LFH9154 cannot be charged.
• Fully charge the batteries before first use.
3.4.1 Charging using the docking station
and the AC charger
The rechargeable Philips batteries LFH9154 can
be charged in the SpeechMike using the docking
station in combination with the AC charger.
Ensure that the AC charger is connected
1
to the docking station (see chapter 3.2 for
more information).
Insert the SpeechMike into the docking slot
2
of the docking station and press it down
firmly until it locks.
• The battery level charge indicator flashes
orange during charging.
• The battery level charge indicator glows green
when charging is complete.
11