Remote Control Unit - Technibel Climatisation REVE 245CH2O Notice D'installation

REMOTE CONTROL UNIT

DISPLAY
Information are displayed when the remote control unit is
switched on.
Displayed when data trasmitted
Operation Mode
Or remote control unit lock
Automatic
Cooling
Heating
Dehumidification (dry)
Fan only
Displayed
when the timer
on is set and
activated
Clock (hours
and minutes)
Displayed in Sleep
Mode Operation
Automatic flap
oscillation
switched on
ON/OFF OPERATION BUTTON
This button turns the air conditioner ON and OFF.
MODE SELECTOR BUTTON
Press this button to modify the air conditioner
mode.
(automatic) ‚
When this setting is selected, the air conditioner
calculates the difference between the thermostat
setting and the room temperature and automatically
switches to the "cool" or "heat" mode.
(heating) ‚
The air conditioner makes the room warmer.
dehumidification (dry)
The air conditioner reduces the humidity in the room.
(cooling)
The air conditioner makes the room cooler.
(fan)
The air conditioner circulate the air.
‚
COOL /DRY/HEAT/FAN
SLEEP BUTTON
For details, see "Sleep mode".
When you press this button in the COOL
or DRY mode, the
appears on the display and the
microcomputer in the remote control unit
will adjust the set temperature to save
energy.
TEMPERATURE SENSOR
SELECTOR
Push IFEEL button to activate the
temperature control in the remote
control unit. This function provides a
more confortable temperature
control.
Shows the
type of timer
Displayed
when the
timer off is
set and
activated
Set temperature or
room temperature
Displayed when
the temperature
is the room
temperature
Indicate that the air
conditioner is
operating in I FEEL
mode
Fan speed indication
Automatic fan
speed
High speed
Medium speed
Low speed
mark
ROOM TEMPERATURE
Push the ROOM button to show the
actual room temperature around the
remote control.
TRANSMITTER
When you press the buttons
of the remote control unit, the
mark appears on the
display to transmit the setting
changes to the receiver in the
air conditioner.
10
SENSOR
A temperature sensor inside the
remote control unit detects the
room temperature.
TEMPERATURE SETTING BUTTONS
— (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
FAN SPEED SELECTOR BUTTON
Fan speed is auto
matically selected
by the microcomputer.
High speed.
Medium speed.
Low speed.
SET BUTTON
Push this button to select the functions:
• set the present time
• set the ON-OFF timer
For detail see "HOW TO SET THE
PRESENT TIME" and "SETTING THE
TIMER".
TIMER AND PRESENT TIME SETTING
BUTTONS
Pushing + or - buttons the setting of the
time and timer can be activated. For detail
see "HOW TO SET THE PRESENT TIME"
and "SETTING THE TIMER".
TIMER BUTTON (timer setting)
Push the TIMER on the display starts the
timer ON and OFF setting procedure.
For detail see "SETTING THE TIMER".
LOCKING THE REMOTE CONTROL
Pushing this button freezes the last
operation setting. When is activated
the remote control will not be able to control
the air conditioner. To release the lock
status push again.
FLAP SPEED SELECTORS
Press this button to select the desidered
flap sweep function.
: The flap moves up and down
automatically.
: Every time you push the
button the flap moves one
step.
TIMER RESET
Push the CLEAR button to cancel all
timer setting.
EG