Control Panel; Before Using For The First Time; Starting Up The Appliance - WMF KUCHENminis Mode D'emploi

Control panel

Symbol/button Function
On/off button
Start button
Select lower cooking area
Select upper cooking area
Remaining time
Leafy and fruit vegetables program
Root vegetables
Rice/pasta program
Individually adjustable program
,
Keep warm function
Insufficient water
Note: The symbols in the body text are shown in inverted colour due to typographical reasons.
16
Before using for the first time
Cleaning
Clean the device before use as described in the chapter on "Cleaning and Care".

Starting up the appliance

1. Fill the water tank with cold tap water. Fill the tank at least half full with water, but no higher than
the max marker.
We recommend always filling to the maxmarker.
The markers are located on the back panel of the water tank.
Note: You must insert the steam locks into the handles on the base of the appliance
to prevent the handles from becoming too hot.
Remove this from the water tank at the end, so that the remaining water can be
emptied using the handles.
2. Place the lower collection tray with the steam pipe and the lower cooking area
on top of the water tank. You can now place the upper collection tray, upper cooking
area and lip on top.
Note: the guided staking system is designed so the individual components can be correctly placed
on each other. All the steam outlets for the cooking areas are located on the back of the device.
There should be no gaps between the individual bowls, cooking areas. Check that the components
have been put together in the correct order.
3. If using just one cooking area, only use the lower collection tray, the lower cooking area without
steam pipe, and the lid.
Select only one program for the lower cooking area
4. Put the ingredients in the cooking area.
Make sure you put the ingredients with similar cooking times in the same cooking area.
Note: if you are using two different ingredients in one cooking area, you can separate the area
with the divider. You can divide the cooking area in half, or 2/3 and 1/3.
Note: use the Cromargan® cooking bowl to prepare rice, noodles or marinated/seasoned foods.
5. Plug the device into the mains. You will hear an acoustic signal.
6. Select the appropriate program/cooking time for the upper (
After pressing the button or you will see the currently selected program with the preset
cooking time on the control panel.
7. Select the programs ( , , , or ) by rotating the selection button. Confirm the program
you want by pressing the selection button.
8. The preset cooking time (for the specific program) will flash. Manually change this by rotating the
selection button and confirming by pressing the selection button.
Note: the device has two individually programmable programs (
your preferred cooking time yourself. The last setting used is saved.
9. Begin cooking by pressing the start button .
Note: the device has a keep warm function to keep food warm after cooking is completed. After
pressing the start button , will flash in the display. Press the start button
to activate the keep warm function. The symbol
switch off after cooking is complete.
.
) or lower cooking area ( ).
and ). Use can use them to set
will appear in the display.
within 3 seconds
will show. If not, the device will automatically
17