Operations; Switching The Unit On And Off; Manual Tare; Pre-Set Tare - OHAUS Ranger Count 1000 Série Guide De L'utilisateur

Ranger Count 1000 Series

4 OPERATIONS

4.1 Switching the Unit On and Off

The power switch is located underneath the right-hand side of the scale. Push the
switch to the "I" position to turn the scale on, and to the "O" position to turn the
scale off. Allow 15-30 minutes for the scale to warm up before use.
Note: Make sure the weighing pan is empty before turning the scale on.

4.2 Manual Tare

Tare is indicated by the
Place the container on the weighing
pan (ex. 100g), then press TARE.
"tARE" will be displayed momentarily
before the weight is tared.

4.3 Pre-set Tare

Pre-set Tare is a known tare value entered via the numeric keypad
Pre-set Tare is indicated by the
With an empty pan:
Press PT, "PrEtA" will flash on the
display. Enter a numeric value (ex.
200g), then press PT. The Pre-set
Tare will be displayed as a negative
value (no weight on the pan).
With an existing weight on the pan
(ex. 250g):
Press PT, "PrEtA" will flash on the
display. Enter a numeric value
(ex. 200g), then press PT.
The Net weight will be displayed.
When the weight is removed from the
pan, the negative weight displayed
is the Pre-set Tare value.
Note: To clear the Tare or Pre-set Tare value, press TARE with the pan empty.
T annunciator.
Weight
T annunciator.
Weight
Weight
g
Piece Weight
100.0.
------. tArE
0.0.
g
Piece Weight
0.0.
PrEtA PrEtA
PrEtA PrEtA PrEtA
200.0. PrEtA PrEtA PrEtA
PrEtA PrEtA
-200.0.
g
Piece Weight
250.0.
PrEtA PrEtA
0.0. PrEtA PrEtA PrEtA
200.0. PrEtA PrEtA PrEtA PrEtA PrEtA
50.0.
-200.0.
EN-9
Count pcs
g/pc
0..
0..
------.
0.0. 0..
Count pcs
g/pc
------.
------.
0.. ------.
Count pcs
g/pc
0..
0..
------.
------.
0.. 0..
0.. ------.