Operating The Kerdi-Board-Nlt Niche Set; Who May Operate The System; Operating The W-Led Modules; Operating The Rgb+W-Led Modules - Schulter Systems KERDI-BOARD-NLT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 83
5

Operating the KERDI-BOARD-NLT niche set

5.1 Who may operate the system?

The KERDI-BOARD-NLT niche can be operated without any special level of qualification.
Children may only operate the LED system under adult supervision.

5.2 Operating the W-LED modules

If no Bluetooth receiver is used, the LED tubes can only be switched on and off if the power
supply is connected to a switchable socket. This operating option is intended for W-LED
modules.

5.3 Operating the RGB+W-LED modules

Selection via Favourites
What are Favourites?
Favourites are selectable settings in which the lighting properties of the RGB+W LED tubes
are stored. The Bluetooth receiver has a default selection of Favourites upon delivery. In ad-
dition to 4 white tones with colour temperatures from 2700 K to 6500 K, the basic colours
and various mixed tones can be selected for RGB+W LED tubes in delivery state. There are a
total of 12 storage spaces available for Favourites.
Adjusting Favourites
In order to change Favourites, a mobile device with the Schlüter
app needs to be connected to the receiver »  "Operation via Schlüter
TROL" on page 73.
Operation via radio remote control
All LED tubes connected to the Bluetooth receiver are controlled simultaneously by means
of radio remote control. The Bluetooth receiver must be taught to the radio remote control in
this regard » "Teaching the radio remote controls" on page 74 . The Bluetooth receiver and
the radio remote control included in the set have already been taught in delivery state.
Switching the LED tubes on and off via radio remote control
Pressing the ON/OFF button switches all LED tubes connected to the Bluetooth receiver on
or off.
Selecting Favourites via radio remote control
Press the UP and DOWN buttons to switch between Favourites. In this regard, Favourites
cannot run through cyclically, i.e. it is not possible to switch from the first Favourite directly to
the last Favourite and, vice versa, nor is it possible to switch directly from the last to the first
Favourite.
72
-LED-COLOR-CONTROL
®
-LED-COLOR-CON-
®

Publicité

Table des Matières
loading

Produits Connexes pour Schulter Systems KERDI-BOARD-NLT

Table des Matières