Schulter Systems KERDI-BOARD-NLT Mode D'emploi page 54

WARNING!
Risk of fire, injury and poisoning due to improper
handling of the special adhesive!
The special adhesive is flammable. If it burns, toxic fumes are produced
which can cause damage to health if inhaled. If the adhesive gets on the
skin, this may cause skin irritation. If the adhesive is swallowed, this may
cause poisoning.
– Never burn off adhesive or adhesive residue.
– Always wear gloves when applying adhesive.
– Do not eat during adhesion.
– Remove adhesive residue immediately after adhesion.
WARNING!
Risk of fire due to overheating!
If the power supply overheats due to contamination (e.g. dust) or system
components overheat due to improper installation, there is a risk of fire.
Short-circuits in the LED system can also cause the cables to overheat,
which can also create a risk of fire.
– It is imperative that short-circuits be avoided.
– Clean the power supply on a regular basis (at least once a year). Prior
to cleaning the power supply, ensure that there is no voltage present.
– Ensure that there is sufficient ventilation when installing the power supply.
– Never install extensions when they are rolled up.
54