Technical Specifications - Toolland TC 76211 Mode D'emploi

TC 76211
not allowed to play with it. It could be
dangerous.
ASSEMBLY
Insert the lower post into the base and

fix it tightly with the screws.
Insert the clamp into the lower post.

Join the lower post and the middle post

together with the screws.
Join the upper post and the middle post

together with the screws.
Join the burner and the upper post

together and fix them tightly by rotating
the knob. Put the power supply cord into
the clamp at the bottom.
USE
Plug in the appliance.

The appliance has two positions: 0 (OFF)

and 1 (ON/1500W). You can change the
position by pulling the pull cord.
Always unplug the appliance after use.


TECHNICAL SPECIFICATIONS

Voltage
Frequency
Power
Weight
Dimensions
MAINTENANCE
Always unplug the appliance and let it

cool down afterwards.
Use a moist rag for cleaning the exterior

of the heater.
Do not use solvents like gasoline,

isoamyl, acetate toluene etc. to clean the
heater.
Do not submerse the heater in water or

any other liquid.
GARANTUEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
ENVIRONMENT
Should your appliance need replacement
after extended use, do not put it in the
domestic waste but dispose of it in an
environmentally safe way.
www.toolland.eu
230V
50Hz
1500W
1,6KG
425x425x290mm
English
7