Manual Time Setting - TFA Dostmann 35.1084.IT Manuel D'utilisation

2. Use the + key to set the time zone. The range runs from 0, -1, -2...-12, 12, 11, 10... 2, 1, 0,
in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Manual Time setting.

MANUAL TIME SETTING

In case the weather station is not able to detect the radio-controlled time (DCF time) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work
as a normal Quartz clock.
To set the clock:
1. The hour digits start flashing in the time display section.
2. Use the + key to adjust the hours and then press SET key to go to the minute setting.
3. The minute will be flashing. Press the + key to just the minutes.
4. Confirm with the SET key and enter the Calendar Setting.
Hours
(flashing)
46
Minutes
(flashing)