AKO 16526A Guide Rapide page 28

Extended programming menu
Use the extended programming menu to configure all of the unit's parameters in order to adapt it to your installation
requirements. Press the SET key for 6 seconds to access it.
IMPORTANT: If the password function has been configured as a keypad lock (b10=2), or as an access
to parameters block (b10=1), you will be requested to enter the password programmed in PAS when
attempting to access either of the two functions. If the entered password is not correct, the unit will go
back to showing the temperature.
IMPORTANT: Certain parameters or menus may not be visible depending on the configuration of the
other parameters and the options chosen during set-up.
Extended programming menu
OUT OF
PROGRAMMING
20 s
Temperature
indicator
6 s
20 s
Level 1 Level 2
OK
Menus Parameters
Change
parameter
Change
menu
OK
28
3516526A11 Ed. 01
IN
PROGRAMMING
Level 3
OK
Values
Change
value
OK
OK
20 s