Technical Data; Machine Features; Intended Use; Safety Instructions - Festool ROTEX RO 90 DX FEQ Notice D'utilisation D'origine

RO 90 DX FEQ
GB
Original operating manual
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Disconnect from the power supply!
Do not dispose of as domestic waste.
Safety class II
Tip or advice
Handling instruction
2

Technical data

Gear-driven eccentric sander
Power
Speed
Eccentric motion
Rotex rotary motion
Sanding stroke
FastFix sanding pad
Weight (without mains cable,
with sanding pad)
Safety class
3

Machine features

[1-1] Protector
[1-2] Change-over switch/spindle stop
[1-3] On/Off switch
[1-4] Mains power cable
[1-5] Extractor connector
[1-6] Speed control
12
RO90 DX FEQ
400 W
-1
3000 - 7000 min
-1
220 - 520 min
3.0 mm
dia. 90 mm
1.45 kg
/II
[1-7] Sanding pad
[1-8] Stop rod
[1-9] Polishing pad*
[1-10] Delta sanding pad
[1-11] Slat sanding pad*
[1-12] Interface pad*
* not on all versions included in the scope of deliv-
ery
The specified illustrations appear at the beginning
of the Operating Instructions.
4

Intended use

As specified, the machines is designed for sanding
and polishing plastic, metal, wood, composite ma-
terials, paint/clear coats, filler and similar materi-
als. Materials containing asbestos must not be pro-
cessed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
5

Safety instructions

5.1 General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
– Harmful/toxic dust can be produced during your
work (e.g. lead-containing paint, some types of
wood and metal). Contact with this dust, espe-
cially inhaling it, can represent a hazard for oper-
ating personnel or persons in the vicinity. Comply
with the safety regulations that apply in your
country. Connect the electric power tool to a suit-
able extraction system.
To protect your health, wear a P2 protective
mask.
Always wear protective goggles to protect
against sanding hazards.
– Prevent liquid polish from seeping into the ma-
chine. The penetration of liquid polish into the
power tool increases the risk of electric shock.